Made in Germany
Made in Germany
Worldwide dealer network
The ATLAS lift mast is characterised by the hexagonal profile proven in the HEXAGON. Due to its design and the resulting load capacity, it is ideally suited for increasing demands. In combination with the hydraulic side tilt, the implement can be optimally brought into working and travel position. With the aid of adapters, all implements available on the market for lifting masts can be mounted. With the CLEMENS mounting, you can also easily attach the lift mast to your existing KMS or ERO front console.
In combination with the hydraulic angle adjustment, the working implement can be optimally brought into working and driving position.
Working angle adjustment
In combination with the hydraulic working angle adjustment, the working implement can be optimally brought into working and driving position.
The hydraulic lateral shift allows us to optimally adjust the working unit to the row width. In combined operations this ensures that a further implement at the rear can be guided centrally in the row.
The parallel linkage allows the parallel control of the lateral inclination and the angle adjustment, so that the attached device always hangs in the vertical position. Especially advantageous for pointed rows.
Additional hydraulic supply, which is mounted directly on the frame. Hydraulically operated work tools can thus be used without loading the hydraulic system of your tractor.
|Weight:||Length x width x height :||Hydraulic requirement:||Stroke (maximum):|
|Lift mast:||about 220 lbs||about 7.5 x 11.8 x 53.3 in||1x double acting + 1x double-acting per option||37.4 in|
|Angle adjustment:||about 132 lbs||about 9.8 x 16.5 x 23.6 in||1x double acting + 1x double-acting per option|
|Rigid support:||about 57 lbs||about 4.9 x 11.8 x 22.2 in||1x double acting + 1x double-acting per option|
|Working angle adjustment:||about 71 lbs||about 14.8 x 18.3 x 8.5 in||1x double acting + 1x double-acting per option|