Shoot-binder Easyfix: A winemaker development for winemakers
The new CLEMENS shoot-binder: Protects the vineyard and its surrounding
- LIGHTWEIGHT! The shoot-binder only weighs approx. 160 kg
- EASY! To use, maintain and adjust!
- ECO-FRIENDLY! Concept with biodegradable clips
- GENTLE! Gently raises vines, high-powered raising of foliage without hurting the vines.
Before and after the use of shoot-binder Easyfix
PROPERTIES:The decomposition of the biodegradable clips after 18 months under sun impact during fall enables the mechanical removal of the yarn with a rewinder, which saves a lot of time.
|weight:||approx. 160 kg|
|working speed:||+/- 4 km/h|
|Magazine capacity for clips:||300 pieces|
|hydraulics:||1x single-action with at least 25 liters|
|pressureless return-hose + 1 double-action for the lift mast|
|Yarn break for initial tension|
Why is the Easyfix so special?
Raising:Two rubber belts with hydraulic gear raise the vegetation. The speed is proportionally adjusted to the driving speed. The belts flexibility allows a sparing raising, so that nothing damages the vegetation.
Clipping:The clipping is triggered by a button in the driver's cabin. It is done through a two-armed stitcher. The left arm is used as a magazine. It contains 300 clips that can stitch around 10 arms. A double cylinder allows the stitcher to open whilst driving around the stakes.
Yarn-break system:The special feature is an integrated yarn-brake system coupled to an electromagnet. It is activated at the end of the row, thus tensioning the twine. After clamping the cord to the last post, it can be separated and simply knotted. The machine uses polypropylene yarn.
Hydraulics:The machine needs at least 25 L/Min. (6,6 Gal). It will be mounted onto a Hubmast. For the operation of the shoot-binder, there is 1 single-action control device and a pressure-less return hose needed. Depending on the construction, there is 1 dw needed for the Mast, 1 dw for the lateral inclinationand 1 dw for the angular adjustment.