RADIUS SL

Pivoting clod breakers are mounted on the blade share of the RADIUS and are used to break up the clods of earth and pull roots up over the ground. This helps to dry out weeds more quickly.

To compensate for side slopes, we offer hydraulic, mechanical or sensory solutions that bring the weeding device back into the correct position. The lateral angle adjustment can be attached to the base frames such as HEXAGON, SB frames or also to the S2R and S5 column lifters.

As an option, soil and stone deflectors can be fitted behind the RADIUS, which pushes the stones and soil out of the alley back towards the vine area after weeding. This keeps the vegetation free for follow-up work such as mulching.

The sensing share is pushed outwards by the soil flow and remains in working position a little longer after the blade share has swung in, until the foot of the vine pushes the small share to the side. Weeds growing directly on the vine can be removed this way.

The clearing share can be retrofitted to all blade shares with the aid of two screws. If you then change the limit stop and thus the working angle of the blade share to 60°, the soil can be pulled out from between the vines.

Protects the working shaft, breaks up the ground and, thanks to its shape, supports penetration into the ground even under hard conditions.

Protects the working shaft, facilitates the penetration of the blade share into the soil and ensures a clean edge between the vegetation in the row and the worked area under the vines. Slight earth transport towards the vine or from the vine into the alley is possible due to the adjustable angle. The Ø 300 mm (12″) disk plow is available with either an indented or a plain disk.

Protects the working shaft and is particularly suitable for plowing back or hilling up.

Protects the working shaft, facilitates the penetration of the blade share into the soil and ensures a clean edge between the vegetation in the alley and the worked area under the vines.

The electromagnetic manual control allows the blade share to be controlled from the tractor cab. A pressure relief valve can be fitted as an option for the single-sided version. The 2-sided version is equipped with a flow divider, adjustable pressure relief valve and 2 toggle switches for separate remote control (right or left or right and left) of the two blade shares.

Additional hydraulic supply, which is mounted directly on the frame. Hydraulically operated work tools can thus be used without loading the hydraulic system of your tractor.