- Slim
- Simple
- Compact
Shop
SB MONO
Description
Would you like to work permanently with only a single-sided undervine care device, but as comfortably and safely as possible? For this case we have developed the SB MONO, which can be used for front and rear mounting. The hydraulic width adjustment can be easily converted from right to left. The base frame can be hydraulically adjusted by 500 mm from 960 to 1,460 mm on one side by means of a cylinder, either to the right or to the left.
Contact
Any questions?
Don´t hesitate to contact us.
Technical data
- Hydraulic requirement:
- 1x double-acting
- Weight without attachments:
- about 242.5 lbs
- Maße Länge x Breite x Höhe:
- about 27.6 x 38.8 x 29.1 in (Outside edges of bars)
- Three-point category: Cat. 1
Accessories
With the oscillating three-point frame, the SB2 tool carrier can be used either in the front or rear of the tractor without having to convert the attachments. A bolt allows two adjustment positions: Rigid or oscillating. |
Oscillating three-point frame
An additional lateral extension of 100 (4”) or 200 mm (8”) is mechanically mounted to the frame. |
Mechanical extension
Additional hydraulic supply, which is mounted directly on the frame. Hydraulically operated work tools can thus be used without loading the hydraulic system of your tractor. |
Pump-Tank-Unit
Available combinations
RADIUS SL
RADIUS SL PLUS
Finger roller
Finger hoe
GSP disk
MULTICLEAN
Column lifter S5
Compact lifter
C.DRIVE control unit
