CLEMENS device control via FendtOne

CLEMENS device control via FendtOne

Here we have summarized important information for you about the control of CLEMENS devices via the signal socket of the new 200 FendtONE:

If you want to use the manual on/off switching of the RADIUS with the joystick of the new FendtONE, you need an adapter for the 3-pin signal plug: 1x CL844.310400 Adapter-3pin to 2x M12

If you need the cable with only one cube connector, you have to add the following information:

CL844.320600 (cable set EW 1.5m)
CL844.320800 (cable set EW 4.0m)
CW830.200600 (cable set EW 6.0m)

If you need the cable with the double cube connector, you must add the following information:

CW830.122300 (cable set DW-300 1.5m)
CW830.122100 (cable set DW-300 4.0m)
CW830.122200 (cable set DW-300 6.0m)

All cable sets have an M12 connector.



CLEMENS Technologies
X